IPv6staticroute

IPv6 static routes examples for prefixes, default routes, host routes and floating routes using outgoing interfaces, global unicast or link-local addresses.

Configuring IPv6 Static Routes in Gaia Portal. You can configure IPv6 static routes only one route at a time. ... In the navigation tree, click Network Management ...

Routing is configured to enable communication between different networks. IPv6 works in the same way as IPv4 in terms of routing, but it has a separate routing ...

Purpose. On a simple network, only static routes can ensure that the network runs properly. If a router cannot run dynamic routing protocols ...

Configuring the IPv6 default route. The IPv6 default route (::/0) is a static route used for all traffic that has a destination network not reachable ...

A recursive static route is valid (that is, it is a candidate for insertion in the IPv6 routing table) only when the specified next hop resolves, either ...

--- Displays the static routes learnt by router R1 through 2000::2. 路由器R3中. R3#show ipv6 route static IPv6 Routing Table - 7 entries Codes: C - Connected, L ...

Basic IPv6 static route configuration example · 1. Configure the IPv6 addresses for all VLAN interfaces. (Details not shown.) · 2. Configure IPv6 static routes:.

IPv6 Static Routing is a technique to manually add an entry in the routing table of a router. The main benefits of using IPv6 static routes are better ...